HVAC systems are fairly expensive. As such, it’s important to get as much use out of them as possible. After all, the more use your HVAC system provides to you, the less you’ll have to spend on HVAC-related costs over the years. 

This is where the importance of HVAC maintenance and HVAC repairing shows up. Through HVAC repairs and HVAC maintenance, you can help prolong your unit’s lifespan, ensuring that you get as much benefit out of it as possible. 

Wondering what HVAC maintenance entails? Then read on. This is your essential guide. 

Replace the Air Filter

The most important part of HVAC maintenance is replacing the air filter. This filter is vital because it prevents dust and debris from making their way into the HVAC system. The more dust and debris make their way in, the more strain your HVAC system will take on. 

Unfortunately, air filters get dirty too and, when they do, they aren’t able to perform their function as needed. As such, if you want your HVAC system to run as efficiently as possible, you need to swap out your air filter every few months. 

Every 3 months is the recommended amount. Note, though, that if you have furry pets in your home, you might want to increase this to every month or two. 

Straighten the AC Fins

On the outside of your air conditioner condenser are a series of metal strips. These strips are known as fins, and they’re integral to the AC’s overall functionality. 

Over time, however, these strips become bent and misshapen. When this occurs, the AC isn’t able to function to the best of its capabilities. For this reason, you need to regularly straighten your AC fins. 

Every 6 months or so, take a knife and run it between each fin. This should open them up adequately, allowing for optimal operation. 

Clean the Ducts

As was noted above, dust and debris will make their way into your HVAC system over time. Unfortunately, a good amount of this dust and debris will come to rest in your HVAC system. 

This is a problem for several reasons.

For one, it causes air quality issues (you don’t want dust in your air, after all). For two, it blocks the flow of forced air, creating temperature variations from room to room. In addition, it puts unnecessary strain on the HVAC system, causing it to use more energy and reducing its overall lifespan. 

This is why you need to clean your ducts out every few years, say, 3 to 5 years apart if you can do this on your own, fine.

That said, it requires a lot of disassembling and reassembling, not to mention the right tools. Therefore, it might be wiser to hand it off to a professional HVAC specialist. 

Keep the Condenser Area Clear

Your AC condenser exists outside of your home. As such, it’s regularly exposed to everything from tree branches to grass clippings to trash and more. Over time, these entities can cause problems, especially if they make their way into the condenser. 

For this reason, you must keep your condenser area clear. Trim up trees and hedges so that nothing is overhanging your condenser. In addition, make sure that there are at least 5 feet of clearance on all of the condenser’s sides. 

If something falls into your condenser, it could cause mechanical and structural damage. That would cost you thousands of dollars to repair. 

Clean Your Furnace

If you use a furnace, you need to clean it every year or so. If you don’t, soot and other debris will cause the furnace to back up, impairing its functionality. 

There are quite a few aspects involved in cleaning a furnace. 

For one, you need to clean its combustion chamber. For two, you need to inspect and clean its flue pipe. In addition, you should replace its oil filter. 

Against, these things should be done every year. Waiting any longer will put undue strain on your furnace, costing you more money on energy bills. 

Scrub Your Condenser Coils

Inside of your air conditioner condenser is a set of components known as condenser coils. These are vital to the air conditioner’s functionality and must remain clean to do their job. 

Unfortunately, they don’t stay clean. Over time, they become overrun with miscellaneous residue. For this reason, once a year or so, you need to scrub your condenser coils. 

Grab a hard thistle brush and some coil cleaner and give them a proper cleaning. This will enable them to communicate with the other components in your condenser, allowing your air conditioner to run without disturbance. 

Have Your HVAC System Inspected 

The last piece of advice we’re going to offer you is to have your HVAC system inspected by a professional. This is done to ensure that all of its components are still in proper working order. 

See, there are many things about HVAC systems that the average homeowner isn’t going to notice. In fact, some homeowners don’t even know the HVAC meaning. So, if an HVAC system is never being looked over by a professional, it could be struggling through all sorts of problems. 

Schedule an inspection appointment every year so that you can catch possible problems and avoid future catastrophes. 

Make HVAC Repairing and Maintenance a Priority

Make no mistakes: HVAC repairing and maintenance should be a priority. Repairing and maintaining your HVAC system regularly allows it to function as efficiently as possible. This allows for minimal energy usage and an optimal HVAC lifespan. 

Need info on similar topics? Our website has you covered. Take a look at some of our other articles now!  

There’s nothing more annoying (or disgusting-looking) than brown, gunky grease stains stuck to the bottom of your pans.

While it’s easy to ignore these ugly stains and go about your day, grease stains can affect a pans’ lifespan and can even mess with the taste of the food you’re cooking. That’s why you need to head to the kitchen and clean your pans!

If you need to know how to get grease off of pans, you’ve come to the perfect place. Here, we’re sharing our top tricks and tricks that will teach you how to get rid of burnt grease and leave your favorite pans looking brand-new. Just keep on reading to get started! 

Removing Grease From Pans With Baking Soda

Cooking pans are notorious for racking up the burnt grease, but that doesn’t mean it’s impossible to get your dishes looking new again. Scrubbing alone won’t work, but this baking soda method will! Head to the kitchen and grab the following supplies:

• Baking soda
• Hydrogen peroxide
• Joy dish soap

To start, blend some baking soda with some hydrogen peroxide until it turns into a thick paste. Then, add 4-5 drops of Joy dish soap to the mixture. Once everything is blended, place some of the paste in the bottom of the pan and start scrubbing with a scrubbing pad using circular motions.

Once you’re finished, let the paste set on the pan for 30 minutes to an hour. After it’s dry, use the scrubbing pad again and then go over the pan’s bottom one final time with a toothbrush.

Removing Grease From Pans With Salt and Vinegar

Do your pans need something more abrasive to remove built-up grease? This salt and vinegar method is for you; check out the steps below:

1. Let the pan soak in white vinegar for an hour.
2. Sprinkle salt into the pan until the bottom is covered.
3. Apply some Joy dish soap onto a scrubbing pad.
4. Scrub in vigorous, circular motions. Add salt/vinegar as needed.

Do this and your pan should look good as new once you’re finished. Just be careful: salt is abrasive, so it could scratch the finish on some pans!

Removing Grease From Pans With Oven Cleaner

Oven cleaner does more than just remove the grease and grime from your oven; it can also help clean up those pans! If you’re wondering how to get grease off of dishes, grab some oven cleaner and follow the steps below:

1. Apply oven cleaner to the bottom of your pan, and let it sit overnight.
2. Scrub the bottom of the pan with a scrubbing pad.
3. Rinse in hot water with Joy dish soap to remove any leftover oven cleaner.

This method works well to remove any burnt-on grease from a variety of pans. While it’s perfectly safe for most of your cookware, this method does work best on ceramic and non-stick items.

Now You Know How to Get Grease Off of Pans

Don’t ignore those grimy, greasy pan-bottoms that you’ve got in the kitchen. Instead, clean them up with these easy methods so that your pans gleam and shine! Now that you’re aware of how to get grease off of pans the right way, you can look forward to focusing on cooking!

Did you learn something new from this post? If you did, be sure to check out the rest of our articles about cool and innovative products.

In 2019, more than 5.5 million households in the United States used heating oil to keep their homes warm. It’s an effective and affordable way to heat your home in the winter months.

When heating your home this way, you need to have heating oil delivery. It’s a process that can sound intimidating for some, but it’s actually quite simple.

Let’s have a look at what the process of home heating oil delivery is and what you can do to make it go smoothly.

What to Expect With Heating Oil Delivery?

The process of heating oil delivery is simple and quick. Before the delivery truck ever makes a trip to your home, the company should first assess your oil usage.

The professionals at www.sperrs.com believe that a company should assess your oil usage from the season before to get an idea of how often you’ll require a fill-up. At this time, they’ll also give you an idea of the budget you’ll need to prepare for.

You should also confirm your address and where the fill-up spot is located at your home.

On delivery day, the truck will arrive ready to fill your system up. They’ll go to the part of your home where the fill-up spot is located and start the process. Once they’re done, they’ll put their equipment away and go on their way.

The process is convenient and quick!

What Can I Do to Help Heating Oil Delivery Companies?

To make the process easier, there are a few things that you can do to help. The delivery company will always appreciate your thoughts in making their jobs easier and quicker.

You’ll benefit from this too, as it will make your life easier as well. Here are a few things to do to prepare for your delivery.

Give Them Some Space

Upon arrival, the delivery truck will need a place to park. If you have a driveway, you can move your cars if needed to give them the best access to your home.

If you don’t have a driveway, make sure that there is adequate room for the truck on the street. You can move your cars to give them the space that they need before arrival.

Do a Little Cleaning

For the delivery driver to complete the home heating oil delivery, they need a clear path. This helps them get their job done faster.

If you have things like a flower bed around where they need to work, try to work out an alternate path nearby that they can take to get the job done.

Don’t Forget About Your Pets

While the delivery driver may like your pets, it’s best to keep them both safe. You should try to keep your pets inside your house or inside a secure area while the driver is there.

Keeping them out of the way makes the delivery much easier and as safe as possible.

You’re Ready for Your First Heating Oil Delivery

Knowing the process is important when it comes to getting heating oil delivery. With these tips, you’re prepared to have the entire process go smoothly.

Did you like this article on home heating oil delivery? Read more of our lifestyle articles for more!

Read Also : The Benefits of Heating a House With Propane